How to Fix GoPro Hero 4 Back Screen Not Working?

As an Amazon Associate, I earn from qualifying purchases.

Hero GoPro4 was the first revolutionary GoPro to come with a built-in touch LCD but it also arrived with a blank screen problem. If you’re facing misery as well, let me tell you that you aren’t the only one. 

But, how to fix GoPro Hero 4 back screen not working? 

First, reinsert the battery and camera immediately. Then, charge the camera to a USB wall charger with a 5V and 1A rating. If the screen still doesn’t start working, change the battery and replace it with a new one. 

This article comes with aid on how to turn GoPro Hero 4 screen back on in detail. So, without further ado, let’s start with it!

Why My GoPro Hero 4 Back Screen Stops Working?

Even though the GoPro camera is waterproof, sometimes water may go inside it if you go too deep under the water. The same goes for extreme temperatures as the screen stops working over and under certain temperatures. 

The optimum level of water resistance and temperature resistance is specified in the manual. You should in no circumstances go further beyond the limit. Otherwise, problems such as the back screen not working may occur. 

Another possible reason would be recording continuously for a long time. Now, remember that the GoPro series offers multiple high-end features that require high battery consumption. 

The higher the battery consumption will be, the more heat will be produced. That’s why, if you shoot for a long time without a break, the produced heat may damage the back screen. In the worst case, GoPro Hero 4 won’t turn on at all. 

Sometimes, the back screen gets damaged due to charging through the wrong cable. If the charging cable doesn’t match its requirement, it may hamper the LCD if you continue charging with it for a long time. 

Again, if the back screen of the camera stops working suddenly, but the front monitor and battery are in a good condition, then probably, the problem lies with the back screen itself. You may need to replace the screen to get to work again. 

How To Fix Hero 4 Back Screen That Is Not Working?

Okay, it is time to talk about how to fix the GoPro Hero 4 back screen. But before you fall into any situation like this, you should use the camera carefully. Just go through all specifications carefully and don’t leave its optimum operating temperatures and heights underwater. 

If the back LCD is damaged already, remove the battery immediately and reinsert it after a while. Then, restart the camera. If this doesn’t solve the problem, you have to reset the GoPro Hero 4 repair. 

To reset the camera, press the “Mood” button continuously until the “Reset” button is highlighted. Select the option to reset the camera. If there’s something wrong due to a software issue, the back screen should run this time. 

If you’re unlucky and the screen goes really damaged, you may have to end up replacing the screen. In that case, check if it is still under the warranty period. If so, you’ll get the screen from the manufacturer. I hope this should solve the problem. 

Frequently Asked Questions (FAQs)

How do I turn on my GoPro screen?

If the LCD doesn’t turn on, you should restart the camera and reinsert the battery the first time. Then, charge the camera with an authentic charger. Check if there’s a red dot that appears which indicates the charging state. The LCD should turn on after a substantial charge. 

Does Hero 4 Black have LCD?

Yes, the Hero 4 Black comes with a built-in touch LCD in front of the camera. You can also add an additional screen on the back of the camera as an optional accessory. 

How do I reset my GoPro LCD?

Press the mode button of the camera multiple times until you get the reset button highlighted. Then press the shutter button to select and confirm the reset. It will restore the factory settings on the camera. 

Final Words

So, that’s all of the article concerning how to fix GoPro Hero 4 back screen not working. The GoPro camera is known to be extremely durable and reliable. The screen should not stop working until something really bad happens. 

If you see the back screen not working, take action immediately. Sometimes, you may need to change the screen as well. 

I hope you liked the article. If so, don’t forget to share it with your friends. Thanks for reading up here.

Related Posts: