The Key Differences Between Fujifilm X-T1 vs X-2

As an Amazon Associate, I earn from qualifying purchases.

Fujifilm released the company’s one of the most popular camera models X-T1 in April 2014. Two years later in 2016, the X-T2 came following the X-T1. Could X-T2 become a successor of X-T1? Which one should you buy if you wanted to choose between these models?

Since X-T2 is the updated version of X-T1; the camera took a few little updates. The patches made the X-T2 much more efficient. This model made a standard move to compete as a company with its rivals.

If you are a loyal fan of Fujifilm and want to buy a camera between these models, I will suggest you read this article to the end. Let’s go!

Fujifilm X-T1 vs X-T2: Comparison Table

Fujifilm introduced the X-T models as a process of moving the old styles away and creating a DSLR style with an electronic viewfinder and more efficient grip. The X-T1 boosted the popularity of Fujifilm and X-T2 has done the rest.

Now, let’s see what the differences are between these cameras’ features:

Camera FeatureX-T1      X-T2
Released dateApril 2014July 2016
Sensor16 MP APS-C X-Trans II CMOS24 MP APS-C X-Trans III CMOS
ISO Sensitivity200 – 6400 ISO (pull 100, push 12800 to 51200 in JPG only)200 – 12800 ISO (pull 100, push 25600 to 51200 in RAW and JPG)
Image Resolution4896 x 3264 pixels6000 x 4000 pixels
Lens systemX-mountX-mount
VideoFull HD up to 60fps4K up to 30fps, Full HD up to 60fps
AutofocusHybrid with 9 phases and 40 contrast-detection areasHybrid with up to 325 points (7×13 and 13×25 grids selectable)
Internal StabilizationNoneNone
Memory Card SlotSD/SDHC/SDXC (UHS-II)2 SD/SDHC/SDXC (UHS-I/UHS-II)
Shutter Speeds1/4000 to 30 seconds, 1/32000s with electronic shutter1/8000 to 15 minutes (with T mode), 1/32000s with electronic shutter
Continuous shooting8 fps and 3 fps (AF-S and AF-C)8 fps and 5 fps, up to 11fps with optional battery grip, 14fps with electronic shutter (AF-S and AF-C)
Viewfinder0.5in OLED with 2,360k dots, approx. 100% FOV coverage, 23mm eyepoint, 0.77x magnification and 60fps refresh rate0.5in OLED with 2,360k dots, approx. 100% FOV coverage, 23mm eyepoint, 0.77x magnification, and up to 100fps refresh rate
Rear monitorTilting 3″ LCD (1040k dots)3-ways articulated 3″ LCD (1.04M dots
Built-in FlashNo, but the EF-X8 unit is includedNo, but the EF-X8 unit is included
Firmware version when tested5.404.10
Weight440g (including battery and memory card)507g (including battery and memory card)
Dimensions129.0 x 89.8 x 46.7mm132.5 x 91.8 x 49.2mm
Shots per battery charge350340
WeatherproofComplete (Splash dust and freeze proof)Complete (Splash dust and freeze proof)
Extra FeaturesWiFi, Panorama, Timelapse, Bracketing, Multiple exposures, Advanced filters, silent mode.WiFi, Panorama, Timelapse, Bracketing, Multiple exposures, Advanced filters, silent mode.
Price at launch1299USD1599USD

What Are The Key Differences Between The Fujifilm X-T1 And X-T2?

Fujifilm X-T series has done a lot for the camera industry. It has pleased the fanbase and regained the company’s popularity through this series.

Now, I will discuss in detail what X-T1 and X-T2 had in common and their differences.

X-T1 and X-T2
X-T1 and X-T2

Display

X-T1’s screen is fitted with a fairly standard up-and-down tilting mechanism. The screen measures 3 inches in size and has a 3:2 aspect ratio. The resolution of the camera is covered with 1.04-million dots.

X-T1 and X-T2
X-T1 and X-T2

X-T2’s LCD screen is adjustable as well as X-T1. An additional hinge is mounted in X-T2 to adjust the angles at a greater range. It helps the camera to capture portrait-orientation images from high or low viewpoints.

X-T2 is the clear winner competing against X-T1 here in display quality.

X-T1 and X-T2
X-T1 and X-T2

Sensor

X-T1 provides a 16.0MP APS-C CMOS X-TRANS II sensor and an EXR CPU II processor. To increase the influence of resolving power the ultimate resolution of the collected picture is additionally affected by factors like optical components, low pass filter, pixel size, and sensor technology.

On the other hand, X-T2 is equipped with a 24.0MP APS-C CMOS X-TRANS III sensor and the X-Technology Pro2 processor to give a substantial edge in real life. Captured photos’ sizes will be larger and cropping is much easier.

To improve the sharpness and degree of detail with some other settings the camera removed the low pass filter.

X-T2 has made a lot of changes in terms of the sensor. The differences are noticeable between the cameras. X-T2 is the winner here.

Sensor Size

The pixels of the Fujifilm X-T2 used are 15.34m2. The same focal length and aperture are used to provide the same amount of depth of field control.

The Fujifilm X-T1, on the other hand, offers a 50 percent greater pixel area of 23.04m2. It features a bigger pixel area for collecting light, which means reduced noise in low light / high ISO photographs.

Though not so many differences are made, X-T2 is ahead of X-T1 in terms of sensor size.

Video

Earlier models of the X-series never focused on videography. To fulfill the primary demand X-T1 provides Full HD up to 60fps.

On the contrary, X-T2 becomes the first Fuji X-series model to record 4K video at 3840 x 2160p. This can record footage at up to 30 frames per second, at a rate of 100Mbps, with Full HD footage recorded up to 60fps. HDMI has developed to output uncompressed Footage.

X-T2 defeats X-T1 here as it has improved the overall video quality. It has made history in the Fujifilm industry for video shooting.

AF system

X-T1 uses a 49-point AF system. It was the minimum requirement to help the camera when continuously tracking a subject.

In reverse, the X-T2 uses the new 91-point system, with 325 points available in single-point mode.

Contrast-detect AF points cover around 65 percent of the imaging area, while phase-detect AF points cover the center 40 percent, helping the camera in shooting a moving object.

In addition, the AF-C tracking algorithm has been updated to increase accuracy when tracking moving objects.

X-T2 is upgraded by a huge margin at the autofocus system. I would choose X-T2 over X-T1 in terms of AF system.

Image Resolution

Previously we talked about X-T1 having a 16-megapixel sensor. X-T1 is a camera of 4896 x 3264 pixels. X-T1 can give a decent output by this feature. 4896 pixels of X-T1 works fantastic on a 5K display.

On the other hand, the jump of the sensor in X-T2 is from 16 to 24 megapixels. The image resolution of X-T2 is 6000 x 4000 pixels. Here is the problem. A 5K display can work well for X-T1 but not for X-T2.

In my opinion, the display of X-T2 in terms of image resolution should have been better. Here, as a balanced camera X-T1 will beat X-T2.

Performance

The X-T1 was and continues to be an excellent camera. Fuji’s relentless firmware upgrades made the X-T1 camera a complete package.

Though it has been many years now in the X-T series Fuji has done a fantastic job.

In the X-T2 camera, a lot of changes have been done. But total shoot of photos and video shooting time in a charged battery has been reduced. Rather than that X-T2 replaced the X-T1 perfectly.

This is clear that R-T2 is superior to the R-T1 in overall performance.

Conclusion

By now, the differences between X-T1 and X-T2 make a clear point of which camera you should choose.

While the differences look minor on the surface, Fujifilm has upgraded the X-T2 in a lot of ways. This brings several features and comforts. Which are essential for a photographer to make his/her life simply better.

The Fuji X-T2 packs a lot of technology into its compact dust- and moisture-proof body compared to the X-T1. A more powerful AF system and user control make it one of the best EVF on the market.

Related Posts:

Similar Posts