How to Fix the canon b200 error mx922? (Explained)
7 mins read

How to Fix the canon b200 error mx922? (Explained)

Kawsar Ahmed0

As an Amazon Associate, I earn from qualifying purchases.

The Canon Pixma MX922 Energy star is a Wireless Inkjet Printer. It is an all-in-one printer that is vastly used in offices and photography studios. 

It is a versatile printer that many studios use to print high-resolution photos. The printer prints images and paper flawlessly but sometimes it shows a “B200 Error” and stops working. What do you mean by the canon B200 error MX922? And how to fix it? 

This article will guide you to answer all the questions and remedy the B200 Error. 

What is the “B200 Error” code?

The B200 Error code is associated with the printing system and the ink cartridge. When the error occurs it highly decreases the printing speed and sometimes the printer stops working. 

canon b200 error mx922

The Canon B200 Error MX922 indicates the fault in the print head. The error gives an early awareness of a catastrophic error. A print head is a part of the ink distribution from the ink cartridges. 

What causes the B200 Error on MX922?

After deep research, it has been found that many things are here why your canon MX922 printer shows an error code b200. 

As it shows on the printer screen, it is not anything with the software and the computer. The main reason for showing the B200 Error is faulty Cartridges. And some factors make a cartridge bad.

The factors behind the errors are:

Jammed Carriage: 

If the Canon MX922 printer had any paper jams, the ink carriage may jam over the printer grip. You will find this out easily if you have to unjam the carriage every time before printing anything, you know the printer has some jamming issues with the carriage.
If your MX922 showed any of these things you have a reason why your Canon MX922 shows a B200 Error.

Full waste ink tank: 

In the Canon Pixma MX922 printer, the waste ink used in the printing and the cleaning process is kept in a tank.  

Sometimes the full waste ink tank can make the MX922 faulty and pop the b200 error on the printer screen. 

And it is recommended to check now and then if the tank is full of waste ink. And clean them to protect the inside of the printer.

If the Canon MX922 printer is not being used for a long time the cartridge can dry up and you will get a B200 error code.

Overheating Issue: 

If the printer gets overheated in very consistent use, it can overheat and lose contact with the cartridges. This can be an issue for the Canon B200 Error MX922.

Read Also: How to change MX922 Printer Defaults on Mac? (Step By Step)

Read Also: How to Setup Canon MG3600 Wi-Fi? (Step By Step Guide)

Can The B200 Error Be Permanently Fixed?

As you already know the reasons behind the Canon B200 error MX922. In some cases, the B200 error may be caused by a permanent problem with the printer’s hardware or firmware. 

In such cases, it may not be possible to fix the error permanently. However, you may be able to temporarily resolve the issue by following the steps above or by contacting Canon support for assistance. 

If you are comfortable with disassembling and repairing electronic devices, you may be able to fix the B200 error yourself by following the steps above. 

However, if you are not confident in your technical skills or if the problem persists after trying the steps above, it is recommended to seek professional help. Canon support or a qualified technician will be able to diagnose the problem and provide a more permanent solution.

How to fix Canon MX922 Error B200? 

Fixing the B200 Error is a straightforward step. The first step would be a hard reset of the printer. After resetting the printer, it will restore everything to its proper position. 

To Power Reset the Canon MX922:

  • Unplug the printer from your computer, turn it off and disconnect the power cable.
  • Wait for 1 hour. Let the printer cool down a bit.
  • Turn On the printer again. Wait for the print carriage to begin moving to the left before allowing it to continue past halfway.

Close the cover when the print carriage has traveled halfway across, but before it reaches the left-hand side.

By doing this the Error code B200 will vanish. If not, you need to follow some additional methods to vanish the B200 Error.

Clean the Print Head: 

To clean the printer head, you can do it manually and automatically. 

To manually clean the printer head follow the following steps:

  • Turn off and unplug the printer completely.
  • Remove the print head from the ink cartridge. You can find full instructions in the printer handbook if you don’t know how to do it. 

And to have visual instruction, watch this video to know how to do it. 

  • Place the print head in a bowl in the correct amounts of water and rubbing alcohol. Keep the print head for a while. 
  • Take them out and fully dry them with a microfiber or paper towel.
  • Reinstall the print head inside the ink bottle. Check if the Canon MX922 still shows the B200 Error.

To automatically clean the printer head:

  • Go to the Control panel and go to Hardware and Sound. 
  • Go to the Devices and Printers section. Select the Printer and right click the Canon Printer and go to Properties.
  • After going to the properties go to the Maintenance tab, and click on the Clean Heads or Clean Cartridges option. 
  • Click on Ok and start the cleaning process.

The process might take a while to complete. After finishing the cleaning process print a paper and check if the Canon MX922 error B200 is gone.

If the printer still shows the error, reinstall the printer Driver. To get the latest driver, go to this website.

Read Also: How to reset Canon System Management PIN? (Step By Step)

Read Also: How to Fix the Canon MX920 Printer Not Responding?

Conclusion

Canon is a well-known manufacturer of high-quality printers. But sometimes some bugs and errors may arise. Canon B200 Error MX922 is one of the most common printer errors. If you decide to clean the printer head, you must proceed with extreme caution.

So, if you follow the methods hopefully the error will be solved.

Hi, I'm Kawsar Ahmed, a photographer with a passion for capturing beautiful moments through the lens of my camera. I specialize in various genres of photography, including portrait, landscape, and commercial photography. My love for photography started at a young age when I received my first camera as a gift. Since then, I have pursued my passion for photography relentlessly and have never looked back. I am constantly on the lookout for new and creative ways to capture stunning images that tell a story and evoke emotions. Apart from my work as a photographer, I also enjoy sharing my knowledge and expertise with others. I also write regularly on my camera blogging website, where I share my experiences, tips, and techniques on photography and the art of storytelling. When I'm not behind the camera or writing, you can find me exploring new places, meeting new people, and immersing myself in different cultures. I believe that the world is a beautiful and diverse place, and I strive to capture its essence through my photography. I am passionate about what I do, and I am committed to delivering nothing but the best. Whether you're an amateur or a professional photographer, your point of view is what makes your art unique. So, don't be afraid to express yourself, to take risks, and to share your perspective with the world. Who knows what wonders you might create?
Website https://cameratroop.com

Related Posts